RCS1100 Series - Engineering Surveyor

Local functions, continuedSleep:Switches the TPS1000to the sleep mode.Applications which involvethe automatic repetition ofmeasurements may be interrupted ifthe instrument is switched to thesleep mode.If a TPS1000 instrument isconnected, these functionsare not available.Serial InterfaceSERIAL INTERFACESet parameters:Baud rate : 19200Parity : NONETerminator : CR/LFData bits : 8Stop bit : 1CONTSet the parameters in accordancewith requirements.The standard parameters for theTCPS26 are:Baud 19200Data bits 8Parity noneMCConfigure Modem / TCPS26Disturbances to the radio link can beimproved by changing the linknumber, which must then be alteredin the internal radio module and atthe same time in the TCPS26.1. Connect the TCPS26 with aY-cable to the serial interface ofthe RCS1100 and to the externalbattery.2. Switch on the RCS1100.3. Press the key for more thantwo seconds to display theconfiguration dialogue.4. Pull out the plug of the TCPS26and plug it back in to switch on theTCPS26.67815To ensure the correcttransfer of data, the settingson the TPS1100 and on theRCS1100 must be the same.RCS1100-1.2.0en27Operation