RCS1100 Series - Engineering Surveyor

Electromagnetic acceptability, continuedCAUTION:There is a risk thatdisturbances may be causedin other equipment if the RCS1100 isused in conjunction with accessoriesfrom other manufacturers (e.g. fieldcomputers, personal computers, portableradios, non-standard cables,external batteries).Precautions:Use the equipment only withaccessories from Leica Geosystems.When combined with the RCS1100,the strict requirements stipulated bythe guidelines and standards areassured. When using computers and2 way radios, pay attention to theinformation provided by themanufacturer regardingelectromagnetic acceptability.CAUTION:Disturbances caused byelectromagnetic radiationcan cause faults in the transmissionof data.Although the RCS1100 meets thestrict regulations and standardswhich are in force in this connection,Leica Geosystems cannotcompletely exclude the possibilitythat the RCS1100 may be disturbedby very intense electromagneticradiation, for instance near radiotransmitters, 2 way radios, dieselgenerators.Precautions:Check the plausibility of resultsobtained under these conditions.WARNING:If the RCS1100 is operatedwith cables attached at onlyone of their two ends (e.g. externalpower supply cables, interfacecables, etc.), the permitted level ofelectromagnetic radiation may beexceeded and the correct functioningof other instruments may beimpaired.Precautions:While the RCS1100 is in use, cables(e.g. instrument to external battery,instrument to computer) must beconnected at both ends.678151726RCS1100-1.2.0en39Safety directions