warning - Sea-Doo.net

WARNINGWhen operating the engine whilethe watercraft is out of the water,theheatexchangerintherideplatemay become very hot. Avoid anycontact with ride plate as burnsmay occur.On some models, an additional flushingconnector is located in enginecompartment to allow flushing whilewatercraft is on a lift or if you prefer toflush from this location, either flushingconnector can be used to flushthe exhaust cooling system. Removeseat to gain access.2F18L0TYALL MODELS EXCEPT RXP1F18E1TY1SOME MODELS1. Flushing connector2. Dust capRefer to POST-OPERATION CAREsection for proper use.F19J01YRXP MODELS1. Flushing connector30) Bilge Drain PlugsShould water be found in the bilge, itcan be easily drained by unscrewingthe drain plugs when engine is off andwatercraft is out of water.CAUTION: Remove watercraftfrom water prior to unscrewingdrain plugs.50 ______________________