warning - Sea-Doo.net

F01K01Z211. Should move freely2. Slight free-play must be present hereEngine Oil Change and OilFilter ReplacementThe oil change and filter replacementshould be performed by an authorizedSea-Doo dealer.Valve AdjustmentThere is no valve adjustment to be performedon this engine.Coolant ReplacementThe coolant replacement should beperformed by an authorized Sea-Doodealer.Fuel Injection SystemThe fuel injection system inspectionshould be performed by an authorizedSea-Doo dealer. Fuel system pressurizationshould be conducted at thesame time.Steering AlignmentWhen the handlebar is directed instraight ahead position, the jet pumpnozzle should be in the same directionallowing the watercraft to run ina straight line. The rear edge of sidevanes should be pointing out side byapproximately 20° when the handlebaris pointing straight ahead.1 1F18L0ZZ1. Approximately 20° when handlebar ispointing straight aheadRefer to an authorized Sea-Doo dealerif an adjustment is necessary. WARNINGEnsure the handlebar and jetpump nozzle operate freely fromside to side and are not stressingthe steering cable or brackets.Never turn handlebar while someoneis nearby rear of watercraft.Keep away from steering movingparts (nozzle, side vanes, linkageetc.).VTS Adjustment(if so equipped)Push on arrow pointing upward on VTSbutton until the VTS stops. The nozzleshould be up without interfering withthe venturi.94 ______________________