warning - Sea-Doo.net

1 1F18L14YTYPICAL1. Drain plugs2. Tighten3. Unscrew2 3Tilt the watercraft slightly to the rearso that the water can completely flowout of the bilge.It is suggested to drain bilge on aramp.CAUTION: Make sure drain plugsare properly secured prior tolaunching the watercraft in water.31) Jet Pump NozzleJet pump nozzle turns side to side viarider input at the handlebar. This providesdirectional control when engineis running.F18J05Z 1TYPICAL1. Jet pump nozzle32) Reverse GateWhen selecting the neutral or reverseposition with the shift lever, the reversegate moves up or down to obtainthe desired position.F18J05Y 1TYPICAL1. Reverse gate33) Jet Pump Water Intakeand Ride PlateThe water is drawn up by the impellerthrough this opening. The water intakegrate minimizes the entry of foreignobjects into the propulsion system.NOTE: The ride plate is the heat exchangerfor the ENGINE cooling system._____________________ 51