warning - Sea-Doo.net

F07E01Y 3 2 1TYPICAL1. Hose adapter2. Quick connect adapter (optional,not mandatory)3. Garden hoseModels with a FlushingConnector in EngineCompartmentThis flushing connector allows flushingwhile watercraft is on a lift or ifyou prefer to flush from this location.Either flushing connector can be usedto flush the exhaust cooling system.The one at the jet pump support (seeabove) or the one in the engine compartment(see below).Remove seat to gain access.1F18E1TY1. Flushing connector2. Dust capRemove dust cap from flushing connectorand attach coupler hose (suppliedin rear storage compartment).Make sure coupler hose is properlylocked to flushing connector.Install a hose pincher (supplied insidetool kit in rear storage compartment)on water outlet hose.NOTE: This prevents water from directlyexiting exhaust cooling system.221F18E1UY80 ______________________1. Coupler hose2. Hose pincher