LS7 Corvette Mechanical Repair Specs (PDF) - Bakes Online

Print Preview Version 8.0 PubTeX output 2006.06.15:1036 File: C:\DOCUME~1\PCOMPO~1.IGS\LOCALS~1\Temp\.aptcache\2006LS7/tfa01804.dvi User: PComposer Page: 1212006 Y Car GMX245 Corvette7.0L (LS7) Engine Mechanical4968Important:• Do not attempt to file the end of the piston ring to achieve the proper end gap clearance.• Measure the piston ring in the cylinder in which it will be used.1. Place the piston ring into the cylinder bore 6.5 mm (0.25 in) below the top of the ring travel area. Both compressionrings should be installed with the piston ring orientation mark facing the top of the cylinder bore.2. Insert a feeler gage and measure the piston ring end gap. Refer to Engine Mechanical Specifications .Connecting Rod and Bearings1777116Notice: Do not clean titanium components with chlorinated solvents. Brake parts, and similar cleaning solvents,safety solvents, or refrigerant that contains chlorofluorocarbons (CFCs) should not be used. Using chlorinatedsolvents to clean titanium components can result in component damage, leading to stress corrosion crackingthat may be undetected with normal visual inspection. Acceptable materials for cleaning titanium componentsinclude non-chlorinated solvents, alcohol, acetone, and methanol.Important:121 of 272