LS7 Corvette Mechanical Repair Specs (PDF) - Bakes Online

Print Preview Version 8.0 PubTeX output 2006.06.15:1036 File: C:\DOCUME~1\PCOMPO~1.IGS\LOCALS~1\Temp\.aptcache\2006LS7/tfa01804.dvi User: PComposer Page: 2012006 Y Car GMX245 Corvette7.0L (LS7) Engine Mechanical1552489Important:• Properly locate the camshaft sprocket onto the locating pin of the camshaft.• The sprocket teeth and timing chain must mesh.• The camshaft and the crankshaft sprocket alignment marks MUST be aligned properly.Position the camshaft sprocket alignment mark in the 6 o’clock position.7. Install the camshaft sprocket (205) and timing chain (208). If necessary, rotate the camshaft or crankshaftsprockets in order to align the timing marks.16492548. Inspect the sprockets for proper alignment. The mark on the camshaft sprocket (1) should be located in the6 o’clock position and the mark on the crankshaft sprocket (2) should be located in the 12 o’clock position.Notice: Refer to Fastener Notice .9. Install the camshaft sprocket bolts.Tighten: Tighten the camshaft sprocket bolts to 25 N·m (18 lb ft).Repair Instructions1556244201 of 272