LS7 Corvette Mechanical Repair Specs (PDF) - Bakes Online

Print Preview Version 8.0 PubTeX output 2006.06.15:1036 File: C:\DOCUME~1\PCOMPO~1.IGS\LOCALS~1\Temp\.aptcache\2006LS7/tfa01804.dvi User: PComposer Page: 2472006 Y Car GMX245 Corvette7.0L (LS7) Engine Mechanical15524745. Install the washer (233) onto the crankshaft, as required. First design washers do not lock onto the balancer.Important: The balancer should be positioned onto the end of the crankshaft as straight as possible prior totool installation.6. Position the balancer (138) onto the end of the crankshaft.15525147. Use the J 41665 (2) and the EN-47812 (1) in order to install the balancer.7.1. Assemble the EN-47812 (1), nut, washer and the J 41665 (2).Insert the smaller end of the J 41665 (2) into the front of the balancer.7.2. Use a wrench and hold the hex end of the EN-47812 (1).7.3. Use a second wrench and rotate the installation tool nut clockwise until the balancer is startedonto the crankshaft.7.4. Remove the J 41665 (2) and reverse the installation tool.Position the larger end of the J 41665 (2) against the front of the balancer.7.5. Use a wrench and hold the end of the EN-47812 (1).7.6. Use a second wrench and rotate the installation tool nut clockwise until the balancer is installedonto the crankshaft.7.7. Remove the balancer installation tools.247 of 272