LS7 Corvette Mechanical Repair Specs (PDF) - Bakes Online

Print Preview Version 8.0 PubTeX output 2006.06.15:1036 File: C:\DOCUME~1\PCOMPO~1.IGS\LOCALS~1\Temp\.aptcache\2006LS7/tfa01804.dvi User: PComposer Page: 2432006 Y Car GMX245 Corvette7.0L (LS7) Engine MechanicalEngine Flywheel InstallationTools Required• J 42386-A Flywheel Holding Tool• J 45059 Angle Meter1552527Important:• Note the position and direction of the engine flywheel before removal. Mark or scribe the end of thecrankshaft and flywheel before component removal. The existing engine flywheel must be installed to the originalposition and direction. Refer to Engine Balancing .• The flywheel does not use a locating pin for alignment and will not initially seat against the crankshaftflange, but will be pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a 2 stagetightening process.1. Install the flywheel to the crankshaft (134).2. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489), or equivalent, to the threads of the flywheelbolts (133).1552525243 of 272