LS7 Corvette Mechanical Repair Specs (PDF) - Bakes Online

Print Preview Version 8.0 PubTeX output 2006.06.15:1036 File: C:\DOCUME~1\PCOMPO~1.IGS\LOCALS~1\Temp\.aptcache\2006LS7/tfa01804.dvi User: PComposer Page: 1892006 Y Car GMX245 Corvette7.0L (LS7) Engine Mechanical• When installing the crankshaft bearings, align the locating tabs on the bearings with the locating notches inthe engine block journal bore and the bearing cap.• Always install crankshaft bearings with their machined partner. Do not file bearings or mix bearing halves.• In order to prevent engine block oil leakage, install NEW M8 crankshaft bearing cap side bolts.The crankshaft bearing cap M8 side bolts have a pre-applied sealant patch applied to the bolt flange.1. Install the crankshaft bearings to the engine block and bearing caps. The thrust bearings are to be installedinto center journal.2. Lubricate the bearing surfaces and crankshaft journals with clean engine oil.156151Notice: To maintain proper crankshaft end play, use extreme care during crankshaft installation. Avoid scoringor damaging the thrust bearing.3. Install the crankshaft.156152Important: The bearing caps must be installed in the proper location and direction.4. Install the crankshaft bearing caps, with bearings, into the engine block.189 of 272