VXA-300.pdf (1.61 MB) - Pilot Mall

To label a memory with an alpha/numeric name, thenext step is to use the DIAL selector knob to selectany of the 48 available characters (including letters,numbers, and special symbols). When the desired firstcharacter appears, press the VOLUME knob momentarilyto move on to the next character.Select succeeding characters in the same manner,pressing the VOLUME knob momentarily after eachselection.After entering the entire name (eight characters maximum),press the [MW (SPL-W)] key for 2 seconds tosave all data for the channel and exit.Note: If you have transferred a Weather Channel directlyto memory, the “WX-001 ~ WX-010” labels utilize thealphanumeric memory, and other labels may not be stored.But if you go to the VFO mode, and dial up or key in theweather station’s frequency manually, you may then storethe frequency and a custom alpha-numeric label yourself.MEMORY OPERATIONRecalling the MemoriesPress the VOLUME knob, repeatedly if necessary,until “- MR -” (Memory Recall) appears on the display.In the MR mode, you will see “CH-” and thepreviously selected channel number appearing on theLCD.Rotate the DIAL selector knob to select the desiredmemory channel.You may change the title structure of the Memory displaytype among:1. Channel Indication (sequential Channel Number,e.g. CH-001, CH-002, etc.);2. Frequency Indication (e.g. 122.500); or3. Alphanumeric Label (e.g. LAX FSS).To change the Memory display title, press the[ ( )] key repeatedly, if necessary, until you getthe desired display title structure.To exit the Memory mode, press the DIAL selectorknob three times to return to the VFO mode.Note: In either the “MR” or the “Book” Memory mode,an easy way to recall memories is to key in the memorychannel number, then press the [SCAN (DW)] key. Forexample, to recall memory channel #14, press [1] [4] [SCAN (DW)].VXA-300 PILOT III OPERATING MANUAL29