VXA-300.pdf (1.61 MB) - Pilot Mall

More documents

Recommendations

Info

10 [DWMD]Function: Selects the Dual Watch/Priority Function.Available Values: DW/PRIDefault Setting: DW“DW” mode:The VXA-300 will activate the Dual Watchfeature when you press [F] [SCAN (DW)].“PRI” mode: The VXA-300 will activate the Priority featurewhen you press [F] [SCAN (DW)].11 [POBP]Function: Select the Power on Beep.Available Values: MD1/MD2/MD3/oFFDefault Setting: MD1Note: You will hear the different selections as you rotatethe DIAL selector knob.MENU (“SET”) MODE12 [IMIC]Function: Internal Microphone On/Off.Available Values: on/oFFDefault Setting: oFFThis controls the status of the radio’s internal microphonewhen an external microphone (such as the MH-44B4BSpeaker Microphone or an aviation headset connected viathe CT-96 Headset Cable) is in use. In most applications,set 12 [IMIC] to “oFF” for proper operation (this disablesthe internal microphone). The internal microphone will stillfunction normally when the external microphone is disconnected.13 [EMRG]Function: Emergency channel On/Off.Available Values: on/oFFDefault Setting: onThis controls the operation of the Emergency [121.5] key.When set to “oFF,” this key will not function. You can stilluse the frequency 121.5 MHz either by entering it on thekeypad in the VFO mode, or by recalling it on a previously-storedmemory channel.48VXA-300 PILOT III OPERATING MANUAL
14 [TEMP]Function: Correcting the thermometer setting.Available Values: –127 ~ +127 (x0.1 °C)Default Setting: 000 (ºC)This allows you to calibrate the internal thermometer witha known-to be-accurate source.15 [UNIT]Function: Selects the measurement units for the temperaturesensor.Available Values: °F/°CDefault Setting: °F16 [TOT]Function: Setting of the Time-Out Timer countdown time.Available Values: 1/3/5/oFF (minutes)Default Setting: oFFThe Time-Out Timer shuts off the transceiver after continuoustransmission exceeds the programmed time.17 [DIMM]Function: Setting of the display brightness level.Available Values: LV1 ~ LV4Default Setting:LV3MENU (“SET”) MODE18 [KEY1]Function: Programming the primary (momentary pressmode) [USER] key assignment.Available Values: no/ANL/PA/PITDefault Setting: ANL (Automatic Noise Limiter)See page 41 for details.19 [KEY2]Function: Programming the third (press and hold mode)[USER] key assignment.Available Values: no/ANL/PA/PITDefault Setting: PA (Public Address)See page 41 for details.VXA-300 PILOT III OPERATING MANUAL49
Page 10 and 11: 8Precautions This apparatus is capa
Page 13 and 14: Low Battery IndicationAs your batte
Page 15 and 16: You may also turn thetop panel’s
Page 17 and 18: Tuning MethodsThroughout this manua
Page 19 and 20: Monitor SwitchWhen listening to a v
Page 21 and 22: LOCK FunctionThe lock function prev
Page 23 and 24: Changing the Channel StepsThe VXA-3
Page 25 and 26: VOX OperationIf you want to have bo
Page 27 and 28: Rotate the DIAL selector knobto sel
Page 29 and 30: NoteADVANCED OPERATIONVXA-300 PILOT
Page 31 and 32: To label a memory with an alpha/num
Page 33 and 34: Note: When scanning upward in frequ
Page 35 and 36: Similar to Dual Watch operation (de
Page 37 and 38: VOR NAVIGATIONTo Select the DVOR Mo
Page 39 and 40: VOR NAVIGATIONThe Aircraft is “ON
Page 41 and 42: Position Cross-checkingSelect two V
Page 43 and 44: PROGRAMMING THE USER KEY ASSIGNMENT
Page 45 and 46: CPU RESETTINGIn some instances of e
Page 47 and 48: MENU (“SET”) MODEMenu No.010203
Page 49: 05 [BEEP]Function: Keypad Beeper On
Page 53 and 54: 26 [UP_L]Function: Sets the low-fre
Page 55 and 56: ACCESSORIES & OPTIONS External Ante
Page 57 and 58: TransmitterPower Output (@ 7.2 V):F
Page 59 and 60: Part 15.21: Changes or modification

VXA-300.pdf (1.61 MB) - Pilot Mall

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?