Tracer AV Installation Manual - Rice Lake Weighing Systems

Command Description ValuesCONSNUM Consecutive number 0–999 999CONSTUP Consecutive number start-up value 0–999 999DATEFMT Date format MMDDYY, DDMMYY, YYMMDD, YYDDMMDATESEP Date separator SLASH, DASH, SEMITIMEFMT Time format 12HOUR, 24HOURTIMESEP Time separator COLON, COMMATable 5-7. PROGRM EDP CommandsCommand Description ValuesGFMTNFMTGross demand print format stringNet demand print format stringTable 5-8. PFORMT EDP CommandsCommand Description ValuesSP1SP2SP1.ENABLE SP2.ENABLE Setpoint enable OFF, ONSP1.KIND SP2.KIND Setpoint kind GROSS, NETSP1.VALUE SP2.VALUE Setpoint value numberSP1.TRIP SP2.TRIP Trip Higher, Lower, Inband, OutbndSP1.BNDVAL SP2.BNDVAL Band value numberSP1.HYSTER SP2.HYSTER Hysteresis numberSP1.ACCESS SP2.ACCESS Setpoint access OFF, ONTable 5-9. SETPNTS EDP CommandsCommand Description ValuesDIGIN1DIGIN2Digital input functionOFF, ZERO, TARE, NT/GRS, UNITS, DSPTAR, PRINT, CLRCN,KBDLOC, HOLD, NEWIDTable 5-10. DIG IN EDP CommandsCommand Description ValuesSOURCE Analog output source GROSS, NETOFFSET Zero offset 0%, 20%ERRACT Error action FULLSC, HOLD, ZEROSCMIN Minimum value tracked 0–999 999MINNEG Minimum negative OFF, ONMAX Maximum value tracked 0–999 999MAXNEG Maximum negative OFF, ONTWZERO Zero calibration 0–16 383TWSPAN Span calibration 0–16 383Table 5-11. ALGOUT EDP CommandsTracer AV Installation Manual - EDP Commands 29