Samsung SNZ-5200 Manual

network connection and setupYou can set up the network settings according to your network configurations.CONNECTING THE CAMERA DIRECTLY TO LOCAL AREANETWORKINGConnecting to the camera from a local PC in the LAN1. Launch an Internet browser on the local PC.2. Enter the IP address of the camera in the address bar of the browser.CameraINTERNETSwitch● NETWORK CONNECTION AND SETUPCameraFirewallExternal Remote PCLocal PCDDNS Server(Data Center, KOREA)M A remote PC in an external Internet out of the LAN network may not be able to connect to thecamera installed in the intranet if the port-forwarding is not properly set or a firewall is set.In this case, to resolve the problem, contact your network administrator. By factory default, the IP address will be assigned from the DHCP server automatically. If there isno DHCP server available, the IP address will be set to 192.168.1.100.To change the IP address, use the IP Installer.For further details on IP Installer use, refer to “Static IP Setup”. (Page 24)English _19