Samsung SNZ-5200 Manual

setup screenVA / MD1. From the Setup menu, select the tab.2. Click .❖ Motion Detection (MD)1. Select a motion detection mode.2. Specify the use of motion detection.3. Select a sensitivity level of the motiondetection.The greater the level is, the lessermovement will be detected.4. Use the drag-and-drop method tospecify the detection area on the video.5. Specify the activation time andactivation condition. For more information about and , refer to “Alarm input”.(page 65)6. When done, click [Apply ( )].J If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motionsensor may not work.66_ setup screen