Samsung SNZ-5200 Manual

More documents

Recommendations

Info

setup screenTo add a video profileYou can add as many codecs as necessary so that a variety of profiles can be appliedaccording to the recording condition.1. Select a profile number.2. Provide the name and select a codec.3. Specify the conditions under which the codec will be applied.4. Specify the details of the selected codec including resolution and frame rate.• Resolution : Set the video size of the MPEG-4, H.264, and MJPEG files.• Framerate : Specify the frame rate.• Compression : Specify the compression rate of the video.• Bitrate control : You can select one from constant bit rate and variable bit rate forcompression. Constant bit rate (CBR) varies the video quality and fixes networktransfer bit rate, while variable bit rate emphasizes the quality by varying networktransfer bit rate.• Maximum bitrate : Specify the maximum bit rate of the video.J As the bit rate can be adjusted limitedly according to the resolution, frame rate and screencomplexity, the actual bit rate can be greater than the maximum bit rate. So you mustconsider the use conditions when setting the value.• Encoding priority : You can set the video transfer method to Framerate orCompression.• GOP size : Select a GOP size between 1 and 15.• Profile : You can select the H.264 profiling method.• Entropy coding : Reduce the possible compression loss due to encoding.• Multicast(VNP) : Specify the use of the VNP protocol.- IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.- Port : Specify the video communication port.- TTL : Set the TTL for the VNP packet.• Multicast(RTP) : Specify the use of the RTP protocol.- IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.- Port : Specify the video communication port.- TTL : You can set the TTL for the RTP packet.44_ setup screen
What is GOP size?GOP (Group of Pictures) is a set of video frames for MPEG-4 and H.264 formatcompression, indicating a collection of frames from the initial I-Frame (key frame) to the nextI-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame.I-Frame is the basic frame for the compression, also known as Key Frame, which containsone complete image data. P-Frame contains only the data that has changed from thepreceding I-Frame.You can set between 1 and 15 for the MPEG-4 and H.264 CODEC.Video setup1. From the Setup menu, select the tab.2. Click .3. Select a mode.• Flip mode : Turn upside downthe image that is captured by thecamera.• Mirror mode : Flip horizontal theimage that is captured by thecamera.4. Set the .- If you select , the video signal willnot be output via the VIDEO OUT port.5. Specify the privacy zone.6. Select a video output type.7. When done, click [Apply ( )].● SETUP SCREENEnglish _45
Page 1 and 2: NETWORK CAMERAUser ManualSNZ-5200
Page 3 and 4: overviewIMPORTANT SAFETY INSTRUCTIO
Page 5 and 6: Class constructionAn apparatus with
Page 7 and 8: CONTENTSOVERVIEW33 Important Safety
Page 9 and 10: PRODUCT FEATURES• HD Video Qualit
Page 11 and 12: AT A GLANCEFront Side● OVERVIEWbI
Page 13 and 14: cItemSystem, Power,SD IndicatorsPOW
Page 15 and 16: J Pressing too hard on the Micro SD
Page 17 and 18: 3 : ALARM COM 6 : RS-485-1 2 3 4 5
Page 19 and 20: network connection and setupYou can
Page 21 and 22: CONNECTING THE CAMERA DIRECTLY TO A
Page 23 and 24: BUTTONS USED IN IP INSTALLER● NET
Page 25 and 26: 3. In the pane, provide thenecessa
Page 27 and 28: 2. Click [Auto Set].The Auto Settin
Page 29 and 30: 3. When done, click [Save Settings]
Page 31 and 32: web viewerCONNECTING TO THE CAMERAN
Page 33 and 34: INSTALLING ACTIVEXIf connecting to
Page 35 and 36: 5. When done, click .6. Close and r
Page 37 and 38: ItemDescription PTZHide the alarmin
Page 39 and 40: To fit the full screen1. Click the
Page 41 and 42: SEARCH AND PLAY BY TIMEM Before you
Page 43: setup screenSETUPYou can configure
Page 47 and 48: PTZ setupConfigure the connection s
Page 49 and 50: Camera setupYou can change the came
Page 51 and 52: BLC SetupYou can specify a desired
Page 53 and 54: Special Setup1. Select .2. Select e
Page 55 and 56: • Date format : Specify the date
Page 57 and 58: • Public DDNS : Select one of pro
Page 59 and 60: IP filteringYou can create a list o
Page 61 and 62: QoSYou can specify the priority to
Page 63 and 64: - Port : The default port of the FT
Page 65 and 66: Alarm inputYou can set the alarm in
Page 67 and 68: ❖ Intelligent Video Analysis (VA)
Page 69 and 70: To use the IV analysis function acc
Page 71 and 72: SYSTEM SETUPProduct information1. F
Page 73 and 74: Upgrade / Reboot1. From the Setup m
Page 75 and 76: LogYou can check the system log or
Page 77 and 78: ItemsDescriptionPan Range -Pan Spee
Page 79 and 80: NetworkEnvironmentalElectricalMecha
Page 81 and 82: TROUBLESHOOTINGPROBLEMI can’t acc
Page 83 and 84: OPEN SOURCE ANNOUNCEMENTSome softwa
Page 85 and 86: THIS SOFTWARE IS PROVIDED BY THE CO
Page 87 and 88: GPL/LGPL SOFTWARE LICENSEThe softwa
Page 89 and 90: 9. The Free Software Foundation may
Page 91 and 92: the stated conditions are met. This
Page 93 and 94: 10. Automatic Licensing of Downstre
Page 95 and 96:
For example, on rare occasions, the
Page 97 and 98:
y court order, agreement or otherwi
Page 99 and 100:
This equipment has been tested and
show all

Samsung SNZ-5200 Manual

Create successful ePaper yourself

Delete template?

Save as template?