DSU II Digital Expandable Systems - Myco-com.biz
DSU II Digital Expandable Systems - Myco-com.biz
DSU II Digital Expandable Systems - Myco-com.biz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• To store a system feature<br />
access code,<br />
<strong>DSU</strong><strong>II</strong> LCD Speakrphone User’s Guide<br />
1. SELECT OPTIONS.<br />
2. SELECT NEXT until<br />
ADIAL and SDIAL options<br />
appears.<br />
Choose a Location<br />
3. SELECT SDIAL OR<br />
ADIAL.<br />
4. PRESS programmable button OR dial pad button (0–9) to<br />
choose storage location.<br />
5. PRESS INTERCOM.<br />
6. DIAL access code associated with feature.<br />
Note: Access codes are listed in Appendix A, Feature Access<br />
Codes - <strong>DSU</strong> <strong>II</strong> <strong>Digital</strong> <strong>Expandable</strong> <strong>Systems</strong> found on page 89.<br />
7. SELECT SAVE to store the number.<br />
8. REPEAT previous steps until all<br />
numbers are stored, OR SELECT<br />
EXIT.<br />
9. PRESS SPEAKER to end.<br />
Select Location<br />
Enter Number<br />
PREV<br />
PREV<br />
Dial the Access Code<br />
Note: The telephone system allows only one autodial number at a<br />
programmable button; however, you can store an autodial number<br />
or feature code at a second level of a location where a DSS is<br />
already stored; just repeat the programming procedure<br />
August, 03 Comdial 59