DSU II Digital Expandable Systems - Myco-com.biz

Programming GCA70-281
Transfer Button
This program lets you set up a button to be used for transferring to a
third party. Most often, this feature is used for transferring calls you
wish to retain to voice mail.
• To assign a “transfer to voice mail” button:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use.
3. DIAL 6.
4. DIAL extension number of voice mail.
5. PRESS SPEAKER to end.
Subdued Off-Hook Voice Announce (SOHVA) Button
You can program a button at your station that you may press to enable
the delivery of a SOHVA call.
• To program a SOHVA button,
1. PRESS INTERCOM AND DIAL **1.
2. PRESS desired programmable button.
3. DIAL 8.
4. PRESS SPEAKER to end programming.
Group Listening Button
Group listening allows others to listen to a conversation over your
telephone speaker while allowing the distant party to hear only that
conversation that is sent through the handset microphone.
• To program a group listening button,
1. PRESS INTERCOM AND DIAL **1.
2. PRESS desired programmable button.
3. DIAL 98.
4. PRESS SPEAKER to end.
64 Comdial August, 03