Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 712.4 Set the Linking ParametersFrom the Tree view list, select the Linking Parameters page and change the Depth as shown.From the extanded Tree view list, select the Tip comp, enable it and add a Breakthrough amountas shown to ensure the complete machining of the through holes.Select the OK button to exit 2D Toolpaths – Drill parameter pages.Page 7-43
Mill Level 1 TUTORIAL 7STEP 13: SPOT DRILL THE 3/8“ DIAMETER HOLESNote that we have not yet spot drill the 3/8” diameter holes. In this step we will have to add the centerpoints of the 3/8 diameter holes in the existing spot drilling operation geometry. We will also change thedepth of the spot drill for the 3/8 diameter holes only.Toolpath Preview:13.1 Add the center points of the 3/8” diameter holes in the existing spot drilling operationIn the Toolpaths Operations Manager, Right mouse click on the last Peck drill operation Geometryhold and drag the geometry above the Drill/Conterbore Geometry.Release the mouse and select Add from the list.Right mouse click hold and dragSelect No button to do not retain the depth from the 3/8 drilling operation.Page 7-44
Page 2: Mill Level 1 Training TutorialsToor
Page 6: TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10: TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13: Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15: Mill Level 1 TUTORIAL 7During the g
Page 16 and 17: Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19: Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21: Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23: Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25: Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27: Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29: Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31: Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33: Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35: Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37: Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39: Mill Level 1 TUTORIAL 7Select the l
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 54 and 55: Mill Level 1 TUTORIAL 713.2 Modify
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 60 and 61: Mill Level 1 TUTORIAL 7STEP 16: CRE
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 68 and 69: Mill Level 1 TUTORIAL 719.2 Select
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 90 and 91: Mill Level 1 TUTORIAL 7STEP 26: VER
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q

Tutorials Mill Level 1 Training - TechEdu.com

Create successful ePaper yourself

Delete template?

Save as template?