Tutorials Mill Level 1 Training - TechEdu.com
Tutorials Mill Level 1 Training - TechEdu.com
Tutorials Mill Level 1 Training - TechEdu.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Mill</strong> <strong>Level</strong> 1 TUTORIAL 722.3 Set the Cut ParametersSelect Cut Parameters and change the Pocket type to Remachining as shown below.Set the Compute remaining stock from the Roughing tool diameter and set the parameters asshown.Compute remaining stock from:Roughing tool diameter enables the system to calculate the remaining stock for remachiningbased on the size of the tool diameter that you enter.Clearance, set as a percentage of the tool diameter, allows you to expand the remachining areaat the beginning and at the end to prevent a cusp of material remaining.Apply entry/exit curves to rough passes allows you to use the Lead in/out parameters.Machine <strong>com</strong>plete finish passes allows you to finish the entire part.From the Tree view list, select Roughing and change the Stepover percentage to 70 % to ensure a<strong>com</strong>plete removal of the stock.Page 7-70