Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 724.2 Select the 1.0 “ diameter Flat End Mill and set the parameters in the Tool pageFrom the Tree view list, select the Tool.Select the existing 1” Flat End Mill and make all the necessary changes in the Tool page.24.3 Set the Cut ParametersSelect the Cut Parameters from the Tree view list and change the Compensation type to Control.Make sure that the parameters match the screenshot below.Cutter compensation set in Control outputs G41 or G42 codes to turn thecompensation on. The compensation amount or tool wear adjustment is set at thecontrol. Using this method you are programming the part edge.Page 7-77
Mill Level 1 TUTORIAL 7From the Tree view list, select Depth Cuts.Enable Depth cuts and set the Max rough step to 0.5From the Tree view list, select Lead In/Out.Note that Cutter compensation in control requires the Lead in/out parameter to be turned on; most ofthe CNC machines need a linear move at the beginning of the program to compensate the cutterdiameter. If you use the arc option too, make sure that the radius is larger than the radius of the tool.Entry/exit at midpoint in closed contours will move the start of the contour toolpath at themidpoint of the line that we selected when chaining.Line /Tangent will be tangent to the arc and machined first in the entry combination. Whenexiting the part the arc will be machined first. See the graphic below.Page 7-78
Page 2:
Mill Level 1 Training TutorialsToor
Page 6:
TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10:
TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13:
Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15:
Mill Level 1 TUTORIAL 7During the g
Page 16 and 17:
Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19:
Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21:
Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23:
Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25:
Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27:
Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29:
Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31:
Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33:
Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35:
Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37: Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39: Mill Level 1 TUTORIAL 7Select the l
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 54 and 55: Mill Level 1 TUTORIAL 713.2 Modify
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 60 and 61: Mill Level 1 TUTORIAL 7STEP 16: CRE
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 68 and 69: Mill Level 1 TUTORIAL 719.2 Select
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 74 and 75: Mill Level 1 TUTORIAL 720.2 Select
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 90 and 91: Mill Level 1 TUTORIAL 7STEP 26: VER
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q
show all

Tutorials Mill Level 1 Training - TechEdu.com

Create successful ePaper yourself

Delete template?

Save as template?