Tutorials Mill Level 1 Training - TechEdu.com

Mill Level 1 TUTORIAL 7Initial stock size source shouldbe set to Stock Setup to use thestock information from StockSetup.Use True Solid allows you, afterverifying the part, to rotate andmagnify the part to more closelycheck features, surface finish, orscallops.Cutter comp in control allowsVerify to use the informationregarding the tool diameter andto simulate the cuttercompensation.Change tool/color to change thecolor of the cut stock toindicated tool changes in thetoolpath.Select the OK button to exit Verify Options.Set the Verify speed by moving the slider bar in the speed control bar.Select the Play button to start simulation.The finished part should appear as shown in the following picture.Select the OK button to exit Verify.Page 7-49