Tutorials Mill Level 1 Training - TechEdu.com
Tutorials Mill Level 1 Training - TechEdu.com
Tutorials Mill Level 1 Training - TechEdu.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Mill</strong> <strong>Level</strong> 1 TUTORIAL 7From the Tree view list, select Break Through to cut <strong>com</strong>pletely through the material by theamount specified.23.4 Set the Linking ParametersFrom the Tree view list, select the Linking Parameters and change the parameters as shown.Note that the Depth is set to Incremental and 0 because we select the circle mill geometry at the bottom(final depth). Setting the Depth to Absolute and -1.0 will give the same result.Select the OK button from the 2D Toolpath – Circle <strong>Mill</strong> parameter screen.Press Alt + T to remove the toolpath display.Page 7-75