Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 7STEP 26: VERIFY THE CHANGED PARTSelect the Select all operations button from Toolpath Manager if needed.Repeat STEP 15 to be sure that the changes have taken place.The finished part should appear as shown in the following picture.STEP 27: POST THE FILESRight-mouse click on the Machine Part Top group and select Edit selected operations and then,select Change NC file name.Page 7-81
Mill Level 1 TUTORIAL 7Enter the new NC name: Machine Part TopSelect the OK button.Post processing, or posting, refers to the process by which the toolpaths in the Mastercam part files areconverted to a format that can be understood by the machine tool's control (for example, G-codes).Generally, every machine tool or control will require its own post processor, customized to producecode formatted to meet its exact requirements.Make sure that all operations are selected, otherwise, Select all operations.Select the Post selected operations button from ToolpathManager.In the Post processing window, make all the necessary changes asshown to the right.NC file enabled allows you to keep the NC file and toassign the same name as the MCX file.Edit enabled allows you to automatically launch thedefault editor.Select the OK button to continue.Select the OK button to post the first group as the geometryname (“Machine Part Bottom”).Page 7-82
Page 2:
Mill Level 1 Training TutorialsToor
Page 6:
TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10:
TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13:
Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15:
Mill Level 1 TUTORIAL 7During the g
Page 16 and 17:
Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19:
Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21:
Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23:
Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25:
Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27:
Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29:
Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31:
Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33:
Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35:
Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37:
Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39:
Mill Level 1 TUTORIAL 7Select the l
Page 40 and 41: Mill Level 1 TUTORIAL 7Select the O
Page 42 and 43: Mill Level 1 TUTORIAL 7Select the O
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 54 and 55: Mill Level 1 TUTORIAL 713.2 Modify
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 60 and 61: Mill Level 1 TUTORIAL 7STEP 16: CRE
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 68 and 69: Mill Level 1 TUTORIAL 719.2 Select
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q
show all

Tutorials Mill Level 1 Training - TechEdu.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?