Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 7STEP 16: CREATING AND RENAMING TOOLPATH GROUPS; RENAMING THE NCFILETo machine the part in two different setups, we will need to have two separate programs. To be able topost process separately the operations of each setup, we will create them under different toolpathgroups with different NC names.Step Preview:16.1 Rename the current Toolpath Group-1 and the NC fileClick two times on the Toolpath Group -1 to highlight it and rename itMachine Part Bottom.Right-mouse click on the toolpath group and select Edit selected operations and then, selectChange NC file name.Enter the new NC name: “Machine Part Bottom”.Select the OK button.Page 7-51
Mill Level 1 TUTORIAL 716.2 Create a new Toolpath GroupRight-mouse click on the Machine Group-1Select Groups from the drop down list and then select NewToolpath group.Rename the toolpath group: “Machine Part Top”.Make sure that the red insert arrow is below the Machining Part Top group;otherwise click on it and drag it below. This ensures that the next operationwill be added in the proper group.STEP 17: SET THE TOP VIEW AS THE CURRENT WCS, TOOL AND CONSTRUCTIONPLANEToolpath Preview:17.1 Using WCS to set the Top view as the current tool plane, construction plane and WCSSelect WCS in the Status Bar.Select WCS Manager.Page 7-52
Page 2:
Mill Level 1 Training TutorialsToor
Page 6:
TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10: TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13: Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15: Mill Level 1 TUTORIAL 7During the g
Page 16 and 17: Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19: Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21: Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23: Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25: Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27: Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29: Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31: Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33: Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35: Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37: Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39: Mill Level 1 TUTORIAL 7Select the l
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 54 and 55: Mill Level 1 TUTORIAL 713.2 Modify
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 68 and 69: Mill Level 1 TUTORIAL 719.2 Select
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 90 and 91: Mill Level 1 TUTORIAL 7STEP 26: VER
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q
show all

Tutorials Mill Level 1 Training - TechEdu.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?