Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 719.2 Select the 1.0 “ Flat end mill and set the parameters in the Tool pageFrom the Tree view list, select Tool.Select the 1.0 “Flat end mill using the Filter options as shown in the facing operation.Make the necessary changes to match the parameters with the screenshot below.Remember that the Feed rate. Plunge rate, Retract rate and Spindle speed values are all define in theparameters of the tool definition. Change them as needed.Page 7-59
Mill Level 1 TUTORIAL 719.3 Set the Cut ParametersFrom the Tree view list, select the Cut Parameters page and change the parameters as shown.Pocket type set to Standard can be used only with closed chains. The tool will be constrainedinside of the closed chain.Machining Direction set to Climb cuts in one direction with the tool rotating in the oppositedirection of the tool motion. See the graphic below.Tip Comp set to the Tip sets the tool offset to the tool tip.Roll cutter around corners inserts arc moves around the corners in the toolpath for a smothertool movement. Set to Sharp (135 degrees or less) will roll the tool at the sharp corners.Page 7-60
Page 2:
Mill Level 1 Training TutorialsToor
Page 6:
TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10:
TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13:
Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15:
Mill Level 1 TUTORIAL 7During the g
Page 16 and 17:
Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19: Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21: Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23: Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25: Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27: Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29: Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31: Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33: Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35: Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37: Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39: Mill Level 1 TUTORIAL 7Select the l
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 54 and 55: Mill Level 1 TUTORIAL 713.2 Modify
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 60 and 61: Mill Level 1 TUTORIAL 7STEP 16: CRE
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 74 and 75: Mill Level 1 TUTORIAL 720.2 Select
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 86 and 87: Mill Level 1 TUTORIAL 724.2 Select
Page 90 and 91: Mill Level 1 TUTORIAL 7STEP 26: VER
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q
show all

Tutorials Mill Level 1 Training - TechEdu.com

Create successful ePaper yourself

Delete template?

Save as template?