Tutorials Mill Level 1 Training - TechEdu.com

More documents

Recommendations

Info

Mill Level 1 TUTORIAL 713.2 Modify the depth of spot drilling for the 3/8 holesSelect the Geometry of the spot drilling operation.Select GeometryClick on the third Point and make sure that one of the 3/8 holes is selected.Then, Right–mouse click on the third point and select Change at point…In the Drill change at point dialog box, enable Depth and changethe value to -0.23.Select the OK button to exit Drill change at point dialog box.Repeat the steps for the fourth point and change the depth to -0.23.Select the OK button to exit Drill Point Manager dialog box.Regenerate the toolpath.Page 7-45
Mill Level 1 TUTORIAL 7STEP 14: BACKPLOT THE TOOLPATHSBackplotting shows the path the tools take to cut the part. This display lets you spot errors in theprogram before you machine the part. As you backplot toolpaths, Mastercam displays the current X, Y,and Z coordinates in the lower left corner of the screen.Click on the Toolpath Group in the Toolpaths Manager to select alloperations.Select Toolpath Group 1Select the Backplot selected operations button.Make sure that you have the following buttons turned on (theywill appear pushed down).Display Toolsand Rapid movesSelect the Isometric View from the view toolbar to see the stock.Select the Fit button.You can adjust the speed of the backplot.You can step through the Backplot by using the Step forward or Step back buttons.Page 7-46
Page 2:
Mill Level 1 Training TutorialsToor
Page 6: TUTORIALSERIESFORHOWTOUSETHISBOOKTh
Page 9 and 10: TUTORIAL SERIES FORTUTORIAL #7LEVEL
Page 12 and 13: Mill Level 1 TUTORIAL 7GEOMETRY CRE
Page 14 and 15: Mill Level 1 TUTORIAL 7During the g
Page 16 and 17: Mill Level 1 TUTORIAL 7Select the A
Page 18 and 19: Mill Level 1 TUTORIAL 7[ Select a l
Page 20 and 21: Mill Level 1 TUTORIAL 74.3 Remove p
Page 22 and 23: Mill Level 1 TUTORIAL 7STEP 5: CREA
Page 24 and 25: Mill Level 1 TUTORIAL 75.2 Creating
Page 26 and 27: Mill Level 1 TUTORIAL 75.4 Creating
Page 28 and 29: Mill Level 1 TUTORIAL 7Select the T
Page 30 and 31: Mill Level 1 TUTORIAL 7[ Select ent
Page 32 and 33: Mill Level 1 TUTORIAL 7The final ge
Page 34 and 35: Mill Level 1 TUTORIAL 7STEP 8: SELE
Page 36 and 37: Mill Level 1 TUTORIAL 7Select the O
Page 38 and 39: Mill Level 1 TUTORIAL 7Select the l
Page 44 and 45: Mill Level 1 TUTORIAL 710.5 Set the
Page 46 and 47: Mill Level 1 TUTORIAL 7Click on the
Page 48 and 49: Mill Level 1 TUTORIAL 7Select the R
Page 50 and 51: Mill Level 1 TUTORIAL 7Copy the geo
Page 56 and 57: Mill Level 1 TUTORIAL 7Select the P
Page 58 and 59: Mill Level 1 TUTORIAL 7Initial stoc
Page 60 and 61: Mill Level 1 TUTORIAL 7STEP 16: CRE
Page 62 and 63: Mill Level 1 TUTORIAL 7Select Top V
Page 64 and 65: Mill Level 1 TUTORIAL 7STEP 18: FAC
Page 66 and 67: Mill Level 1 TUTORIAL 7From the Tre
Page 68 and 69: Mill Level 1 TUTORIAL 719.2 Select
Page 70 and 71: Mill Level 1 TUTORIAL 7From the ext
Page 78 and 79: Mill Level 1 TUTORIAL 7Select only
Page 90 and 91: Mill Level 1 TUTORIAL 7STEP 26: VER
Page 92: Mill Level 1 TUTORIAL 7Select the r
Page 96 and 97: Mill Level 1 TUTORIAL 7Student prac
Page 98: Mill Level 1 TUTORIAL 7TUTORIAL 7 Q
show all

Tutorials Mill Level 1 Training - TechEdu.com

Create successful ePaper yourself

Delete template?

Save as template?