Brunner USA Instructions - Robeys Ltd
Brunner USA Instructions - Robeys Ltd
Brunner USA Instructions - Robeys Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connect the pressure gauge lineto the exhaust sensor connectionwith a ‘lug clamp’. Installation isas shown on the image.The pressure measuring line isconnected to the adapter in thedelivery of the silicone tube ofthe <strong>USA</strong>. The pressure gaugeline with an 'lug clamp'.Note that the ’lug clamp’ (5)cannot be opened withoutdamage. The lug clamps are notre-usable.5 Mounting the lug clamps6 AdaptorThe Cable support spring (3)must be pushed over thepressure gauge line at the pointof highest risk of buckling(= bending radius).7 Cable support spring<strong>Brunner</strong> <strong>USA</strong> Installation & Operation Manual 11August 2013