Brunner USA Instructions - Robeys Ltd

More documents

Recommendations

Info

The vacuum circuit breaker safety (USA) is in compliance with thebasic maintenance measures in accordance with DIN 31 051 inconjunction. DIN EN 13 306 to maintain operation by a specialist.The home owner must test the USA at least once a month.Turn off the power to the USA ( the ventilation system / hood willstop working ), when the power is turned on again the USA willreturn to normal start up.Check the pressure compensation opening / s for blockage andclean if necessary.Check the screws of the mounting of the sensor and retighten ifnecessary.Check the pressure gauge line for blockage and clean if necessary.Check the correct position of the clamp and seal the flue andcorrect if necessary.Contaminants in the flue delay the response time of thetemperature sensor!Brunner USA Installation & Operation Manual 22August 2013
FUSESThe USA has three miniature fuses. These are located on theboard.Subminiature Fuse X (T2A)Product No.: 025552 x miniature fuse-Y (T160mA),No.:02551Brunner USA Installation & Operation Manual 23August 2013
Page 1 and 2: INSTALLATION AND OPERATIONBrunner U
Page 3 and 4: The installation of the USA must fo
Page 5 and 6: Brunner USA Installation & Operatio
Page 7 and 8: MOUNTING OF THE USAImportant note!T
Page 9 and 10: • If possible do not install the
Page 11 and 12: Connect the pressure gauge lineto t
Page 13 and 14: Ventilation systems, fume hoods, ki
Page 15 and 16: SETTING THE USAThe USA can be a PC
Page 17 and 18: Status indicators:StatusdisplayMean
Page 19 and 20: OPERATIONThe USA offers the possibi
Page 21: FUNCTION TEST AND MAINTENANCEWhen t
Page 25 and 26: TECHNICAL DATAThe USA has been test
Page 27 and 28: Brunner USA Installation & Operatio

Brunner USA Instructions - Robeys Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?