13.07.2015 Views

Brunner USA Instructions - Robeys Ltd

Brunner USA Instructions - Robeys Ltd

Brunner USA Instructions - Robeys Ltd

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Error codes:ErrorCodeChanging the parameters of the <strong>USA</strong> may only be made bytrained personnel and must be recorded in the table below.The operator should be noted that the settings cannot bechanged.MeaningErrorCodeMeaning0001 Frequency error 0002 Supply voltage0004 Oscillator voltage 0008 Offset voltage0010 Relay error 0020 EEPROM data0040 Invalid state 0080 Invalid temperaturesetting0100 Compressive stress hasreached limit0200 Invalid parametersetting0400 Program code error 0800 Error when checkingthe data area1000 Error at 5v supply 2000 Specify minimumtime4000 Error Watchdog test 8000 Error hardware<strong>Brunner</strong> <strong>USA</strong> Installation & Operation Manual 16August 2013

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!