TorqueMaster SD Spring - 9100 9400 9600 - Wayne Dalton

15Tools Needed:7/16” Socket9/16” SocketRatchet Wrench9/16” WrenchLevelFlat TipScrewdriverAttaching Adjustable Flagangleto Horizontal TrackNOTE: If quick install flagangles wereinstalled in Step 14, skip this step andcontinue with Step 16. If not, complete thisstep.To install horizontal track, place the curvedend over the top roller. Align the bottom ofthe horizontal track with the vertical track.Hand tighten the horizontal track to theflagangle with (2) 1/4” - 20 x 9/16” largehead ribbed track bolts (or stud plate ifincluded) and (2) 1/4”-20 flange hex nuts.WARNINGDO NOT RAISE DOOR UNTIL HORIZONTALTRACKS ARE SE CURED AT REAR, ASOUTLINED IN STEP 34, OR DOOR COULDFALL FROM OVERHEAD POSI TION CAUSINGSEVERE OR FATAL INJURY.Level the horizontal track assembly andbolt the horizontal angle to the slot in theflagangle using (1) 3/8” - 16 x 3/4” trusshead bolt and (1) 3/8” - 16 hex nut. Repeatfor other side. Remove the nail that wastemporarily holding the top section inplace, installed in Step 13.IMPORTANT: Failure to remove nailbefore attempting to raise doorcould cause permanent damage totop section.NOTE: If an idrive ® opener will be installed,position horizontal tracks slightly abovelevel.1/4”-20 flangehex nutsflagangle 1/4” - 20 X 9/16”large headribbed trackbolts3/8” - 16 X 3/4”TRUSS HEAD BOLTstud plate3/8” - 16 Hex nuthorizontal ANGLEHORIZONTAL TRACKINSTALLATION16Tools Needed:7/16” WrenchAdjusting Top BracketsWith horizontal tracks installed, you cannow adjust the top brackets.topsectionHORIZONTALtrackVertically align the top section of thedoor with the lower sections. Oncealigned, position the top bracket slide,out against the horizontal track.Maintaining the slide’s position, tightenthe (2) 1/4” - 20 flange hex nuts tosecure the top roller slide to the topbracket base.CorrecttopsectiontopSECTIONTOPBRACKETSLIDE(2) 1/4” - 20FLANGE HEXNUTSinCorrectPlease Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to yourlocal yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com19