Deep Freeze Enterprise User Guide - Faronics

Example 2 - Multiple Subnets One local service| 103Example 2 - Multiple Subnets One local serviceIn this environment, the clients are located across more than one subnet. There is still only oneConsole being used. This environment does not require a Remote Console, although one could beused. The following diagram shows the network topology:In this scenario (similar to Example 1 - Single Subnet) both the clients and the connection hostedby the Console are using the same port. This port is configured in the Deep Freeze ConfigurationAdministrator in the Advanced Options tab, before creating the Workstation Install file orWorkstation Seed.In order for the clients to be seen, they need to be configured to use a LAN/WAN connection.When the LAN/WAN option is selected, a Console IP field appears. Specify the IP of the machinethat will run the Enterprise Console. An example of these settings are shown in the AdvancedOptions tab below:Deep Freeze Enterprise User Guide