Deep Freeze Enterprise User Guide - Faronics

28|Using Deep Freeze Configuration AdministratorThawSpaceThawSpace is a virtual partition that can be used to store programs, save files, or make permanentchanges. All files stored in the ThawSpace are retained after a restart, even if the computer isFrozen. A ThawSpace can be created on a drive that is configured to be Frozen or Thawed.To create a single ThawSpace or multiple ThawSpaces using the Configuration Administrator,complete the following steps:1. Select the Drive Letter. The default letter is T:. However, it can be changed to any availableletter. The next available letter is automatically used if the selected drive letter already existson a computer when Deep Freeze is installed.— When a Drive Letter is selected from the drop-down and used to create a ThawSpace, it isremoved from the drop-down.— When a ThawSpace is removed, the corresponding Drive Letter is added back to thedrop-down.— The Drive Letter cannot be same as the Host Drive.2. Enter the Size. This is the size of the ThawSpace. The maximum size is 1024 GB and theminimum size is 16MB.— If the computer does not have enough free space to accommodate the selected ThawSpacesize, the size of the ThawSpace is adjusted downward to ensure proper operation of thecomputer.— If you select the Size less than 16MB, the ThawSpace is set to 16MB.— If you select the Size more than 1024GB (1TB), the ThawSpace is set to 1024GB (1TB).Deep Freeze Enterprise User Guide