User Manual DDS200 Digital Demodulation System 070-9952-00

Appendix C: List of Error MessagesTable C–3: Execution errors (Cont.)ErrornumberTest displayed upon an error queue queryExplanationsÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–211 Trigger ignoredÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–212The trigger (GET, *TRG or trigger signal) was ignored because of the device timecontrol.Example: the device was not ready to answer.Arm ignoredAn arming signal was ignored by the device.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–213ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁInit ignoredthe initialization of a measurement was ignored since another measurement wasalready being carried out.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–214 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁTrigger deadlockThe trigger cannot be processed.(The trigger source for releasing a measurement is set to GET and thesubsequent query is received. The measurement cannot be started if GET is notreceived, GET die darauf folgende Query wird empfangen. Die Messung kannÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁohne den Empfang von GET nicht gestartet werden, GET, however, generates aninterrupted error.)ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–215 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁArm deadlockThe arming signal cannot be processed.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–220 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁParameter errorThe command contains a faulty or invalid parameter.Example:ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–221ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁSettings conflictThere is a setting conflict between two parameters.Example: FM1 and PM1 cannot be switched on simultaneously.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–222 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁData out of range–223The parameter value is outside the legal range as defined by the device.Example: the command *RCL only allows entries in the range 0 to 49.Too much dataThe command contains too many data.Example: the device has not enough storage capacity.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–224 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁIllegal parameter value–230The parameter value is invalid.Example: an invalid character data element is specified.Data corrupt or staleData are incomplete or invalid.Example: the device has aborted a measurement.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ–231 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁData ÁÁÁÁ questionableÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁThe measurement accuracy is suspect.ÁÁÁÁ–240 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁHardware errorThe command cannot be executed because of a hardware problem in the device.ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁDDS200 Digital Demodulation System User Manual C–5