User Manual DDS200 Digital Demodulation System 070-9952-00

Manual OperationFigure 2–26: STO: EDIT TEXT menuWhen the EDIT TEXT key is pressed, the available characters are displayed.Characters can be selected using the cursor keys. Pressing the GET CHAR-ACTER key adds the selected character to the MEMORY TEXT. The cursor canbe moved in the MEMORY TEXT to the right or left using the RIGHT andLEFT cursor keys. The DELETE CHARACTER soft key clears the character infront of the cursor. A maximum of eight characters is allowed for RF memorynumber identification. When the SAVE & EXIT key is pressed, the MEMORYTEXT is assigned to the selected RF memory number is displayed at the topright of the display.STATUS MenuSelect the STATUS menu using the STATUS key in the MAIN FUNCTIONblock (see Figure 2–27). In this menu, all main device settings are displayed.This particularly applies to the order of QAM parameters, the symbol rate, andthe selected SAW filter. Settings that affect input selection or attenuator andpreamplifier settings must be made in the INPUT menu.2–30 DDS200 Digital Demodulation System User Manual