User Manual DDS200 Digital Demodulation System 070-9952-00

Appendix E: Programming ExamplesThe following examples can be used as a basis for solving complex programmingtasks.The programming language used is QuickBASIC. It is also possible to translatethe programs into other programming languages.QuickBasic must be started from the directory in which it is installed using thefollowing command: Incorporating IEC/IEEE–Bus Library for QuickBASIC Initialization and Initial StatusWhen a program is started, both the IEC/IEEE bus and the device settings are setto a defined status using the subroutines InitController and InitDevice.Initialization of Controller Initialization of DeviceIEC/IEEE–bus Status Register and DDS200 settings are brought to a definedstatus. DDS200 Digital Demodulation System User Manual E–1