User Manual DDS200 Digital Demodulation System 070-9952-00

Manual OperationAfter selection of a preset key, the unit queries if the settings are to be reset. Ifthis is confirmed by the YES soft key, the unit is reset with the factory-setsettings.Press the PRESET key after a new power-up of the DDS200 if the settings of theprevious session are not exactly known.Hardcopy KeyOn pressing the Hardcopy key, the current screen contents is output on theprinter. The selection of the type of printer is described in Printer Menu –Selecting the Type of Printer on page 2–23.STO/RCL – Storing DeviceSettingsThe user can store or recall up to 10 specific device settings with the STO andRCL keys. Thus, he can retain his own settings even after the unit has been usedby other persons.Press the STO key to store the current overall device setting (see Figure 2–13).Figure 2–13: STORE menuFor storing, enter a memory location number under which the setup can berecalled later. Use the numeric keys for this purpose. The range of values is 0 to9. After pressing the ENT key, the setup is stored and the unit returns to themeasurement display.DDS200 Digital Demodulation System User Manual 2–17