TM-U295/U295P

More documents

Recommendations

Info

Character structure: Character size: 5 x 7 with 1-dot spacing (normal dot) 7 x 7 with 3-dot spacing (half dot) 5 x 7 font: ANK: 1.6 mm (.063”) x 2.9 mm (.114”) Graphics: 1.9 mm (.075”) x 2.9 mm (.114”) 7 x 7 font: ANK: 1.3 mm (.051”) x 2.9 mm (.114”) Graphics: 1.6 mm (.063”) x 2.9 mm (.114”) 4-2 Reference Information
Paper Specifications Paper type: Total thickness: Paper size: Normal (high quality), pressure sensitive, and carbon copy papers Single-play paper: 0.09 to 0.25 mm (.0035 to .0098”) Copy paper: 0.09 to 0.35 mm (.0035 to .0138”) 80 mm (W) × 69 mm (L) to 182 mm (W) × 257 mm (L) (3.15” × 2.72” to 7.17” × 10.12”) Up to the European B5 size. Copy capability and paper thickness: No copies (singleply): Combination of normal paper and pressure sensitive paper: 0.09 to 0.25 mm (.0035 to .0098”) (135 kg paper or equivalent) 3 sheets maximum (1 original and 2 copies) (0.09 to 0.35 mm (.0035 to .0138”)) Backing paper: 0.07 to 0.20 mm (.0028 to .0079”) Copy and original paper: 0.04 to 0.07 mm (.0016 to .0028”) Carbon copy paper: Approximately 0.035 mm (.0014”) Reference Information 4-3
Page 1 and 2: TM-U295/U295P Operator’s Manual U
Page 3 and 4: Printer parts (1) Upper case (2) Pr
Page 5 and 6: FCC CLASS A FCC Compliance Statemen
Page 7 and 8: DECLARATION of CONFORMITY for CE MA
Page 9 and 10: About This Manual Setting Up and Us
Page 11 and 12: Chapter 5 Commands Command Notation
Page 13 and 14: Removing the Transportation Damper
Page 15 and 16: 2. Connect the other end of the cab
Page 17 and 18: Den Drucker an die Lade anschließe
Page 19 and 20: Connecting the Power Supply This pr
Page 21 and 22: CAUTION: Be sure to perform the ste
Page 23 and 24: 8. To put the cover back on the pri
Page 25 and 26: 3. While holding down the RELEASE b
Page 27 and 28: TM-U295 Switch Function ON OFF 1 Da
Page 29 and 30: Chapter 2 Using the Printer The con
Page 31 and 32: Then remove the used ribbon by gras
Page 33: Chapter 4 Reference Information Pri
Page 37 and 38: Printing position NOTE 1. Mechanica
Page 39 and 40: EMI and Safety Standards EMI standa
Page 41 and 42: Chapter 5 Commands Command Notation
Page 43 and 44: [Description] Prints the data in th
Page 45 and 46: Bit Off/On Hex Decimal Function 3 O
Page 47 and 48: [Description] Sets the character sp
Page 49 and 50: • d is the dot data for the chara
Page 51 and 52: ESC ✽ m nL n H [d]k [Name] Select
Page 53 and 54: Hex 1B 3D n Decimal 27 61 n [Range]
Page 55 and 56: [Notes] • Up to 32 tab positions
Page 57 and 58: [Default] [Reference] Double-densit
Page 59 and 60: dx = [dxL + dxH ✕ 256] dy = [dyL
Page 61 and 62: [Range] 0 ≤ n ≤ 255 [Descriptio
Page 63 and 64: [Description] Sets the time that th
Page 65 and 66: • When Auto Status Back (ASB) is
Page 67 and 68: [Description] Turns upside-down pri
Page 69 and 70: Bit Off/On Hex Decimal Status for A
Page 71 and 72: Third byte (paper sensor informatio
Page 73 and 74: • When Auto Status Back (ASB) is

TM-U295/U295P

Create successful ePaper yourself

Delete template?

Save as template?