TM-U295/U295P

Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects paper sensor(s) to output paper end signals, using n as
follows:
Bit Off/On Hex Decimal Function
0
1
2
3
4
5
6
7
Off 00 0 Undefined.
On 01 1 Undefined.
Off 00 0 Undefined.
On 02 2 Undefined.
Off 00 0 Undefined.
On 04 4 Undefined.
Off 00 0 Undefined.
On 08 8 Undefined
Off 00 0 TOF sensor disabled.
On 10 16 TOF sensor enabled.
Off 00 0 BOF sensor disabled.
On 20 32 BOF sensor enabled.
Off 00 0 Undefined.
On 40 64 Undefined.
Off 00 0 Undefined.
On 80 128 Undefined.
[Notes] • It is possible to select multiple sensors to output signals. Then, if
any of the sensors detects a paper-end, the paper end signal is
output.
• This command is available only with a parallel interface and is
ignored with a serial interface.
[Default] n = 0
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
5-20 Commands