TM-U295/U295P

More documents

Recommendations

Info

Electrical Specifications Supply voltage: +24 VDC ± 10% Current consumption: Operating (except for drawer kickout): Mean - approx. 600 mA at 24 VDC (full-column printing and data transmission of ANK characters) Peak - approx. 5.5 A at 24 VDC (full-column printing and data transmission of ANK characters) Standby: approx. 100 mA (at 24 VDC, 25°C (77°F) 4-6 Reference Information
EMI and Safety Standards EMI standards (measured when using the printer with the Epson PS-150): FCC: CE marking: Class A Safety standards: UL1950-2TH-D3 (Recognized component) CSA950-D3 (Recognized component) EN60950 (IEC950 2TH) Reliability Life: 3,000,000 lines ❑ End of Life is defined as the point at which the printer reaches the beginning of the Wearout Period. MTBF: 180,000 hours ❑ Failure is defined as Random Failure occurring at the time of the Random Failure Period. MCBF: 7,000,000 lines ❑ This is an average failure interval based on failures relating to wearout and random failures up to the life of 3 million lines. Reference Information 4-7
Page 1 and 2: TM-U295/U295P Operator’s Manual U
Page 3 and 4: Printer parts (1) Upper case (2) Pr
Page 5 and 6: FCC CLASS A FCC Compliance Statemen
Page 7 and 8: DECLARATION of CONFORMITY for CE MA
Page 9 and 10: About This Manual Setting Up and Us
Page 11 and 12: Chapter 5 Commands Command Notation
Page 13 and 14: Removing the Transportation Damper
Page 15 and 16: 2. Connect the other end of the cab
Page 17 and 18: Den Drucker an die Lade anschließe
Page 19 and 20: Connecting the Power Supply This pr
Page 21 and 22: CAUTION: Be sure to perform the ste
Page 23 and 24: 8. To put the cover back on the pri
Page 25 and 26: 3. While holding down the RELEASE b
Page 27 and 28: TM-U295 Switch Function ON OFF 1 Da
Page 29 and 30: Chapter 2 Using the Printer The con
Page 31 and 32: Then remove the used ribbon by gras
Page 33 and 34: Chapter 4 Reference Information Pri
Page 35 and 36: Paper Specifications Paper type: To
Page 37: Printing position NOTE 1. Mechanica
Page 41 and 42: Chapter 5 Commands Command Notation
Page 43 and 44: [Description] Prints the data in th
Page 45 and 46: Bit Off/On Hex Decimal Function 3 O
Page 47 and 48: [Description] Sets the character sp
Page 49 and 50: • d is the dot data for the chara
Page 51 and 52: ESC ✽ m nL n H [d]k [Name] Select
Page 53 and 54: Hex 1B 3D n Decimal 27 61 n [Range]
Page 55 and 56: [Notes] • Up to 32 tab positions
Page 57 and 58: [Default] [Reference] Double-densit
Page 59 and 60: dx = [dxL + dxH ✕ 256] dy = [dyL
Page 61 and 62: [Range] 0 ≤ n ≤ 255 [Descriptio
Page 63 and 64: [Description] Sets the time that th
Page 65 and 66: • When Auto Status Back (ASB) is
Page 67 and 68: [Description] Turns upside-down pri
Page 69 and 70: Bit Off/On Hex Decimal Status for A
Page 71 and 72: Third byte (paper sensor informatio
Page 73 and 74: • When Auto Status Back (ASB) is

TM-U295/U295P

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?