Twido Programmable controller

References
Twido programmable controller 0
Extreme base
References
Twido Extreme base
Designation Inputs Outputs Program memory Reference Weight
Twido Extreme controller
base
13 x 12 V c
9 x 0…5 V c
14 x 300 mA c
1 x 50 mA c
1 x 1 A c
3 PWM/PLS
kg
3,000 instructions TWD LEDCK1 1.300
TWD LEDCK1
Components for fixing and connection (to the sensors and actuators)
Designation Use Reference Weight
kg
Fixing kit 4 spacers, 8 washers, 8 shock mounts TWD XMTK4 0.150
TWD FCNK70
IP 67 70-way connectors
No. 2, see page 33
For mounting (1) with 80 pins, 80 plugs, 1 cover TWD FCNK70 0.200
Preformed with a 1.5 m cable and fl ying leads at the other end TWD FCWK70L015 2.920
Separate parts for Twido Extreme controller
Designation Use Reference Weight
kg
Crimping pliers Crimping wires onto the 70-way connector pins TWD XMTCT –
RPF 2ppD
Designation
IP 40 power relay
(thermal current Ith 30 A) (2)
Control
voltage
Number and type
of contacts
Order in
multiples of
Unit reference Weight
kg
12 V c 2 “N/O” 10 RPF 2AJD 0.086
2 “C/O” 10 RPF 2BJD 0.086
24 V c 2 “N/O” 10 RPF 2ABD 0.086
2 “C/O” 10 RPF 2BBD 0.086
XGS Z33 ETH
TCS ESU 051 F0
Components for connection to the Ethernet TCP/IP network
Designation Use Length Reference Weight
kg
3-channel Ethernet box
Integrated Ethernet port
(10/100 Mbps)
Modbus TCP/IP protocol
Class A10
Modbus shielded cables
Male M12 connector-fl ying
leads
Ethernet switches
5 x 10BASE-T/100BASE-TX
Unmanaged
Connecting the Twido Extreme controller to the
Ethernet TCP/IP network
Connection between the Ethernet box XGS Z33ETH
and a Twido Extreme controller
– XGS Z33 ETH 1.060
2 m TCS MCN1F2 0.115
5 m TCS MCN1F5 0.270
10 m TCS MCN1F10 0.520
IP 67, M12 connectors (type D) – TCS ESU 051 F0 0.210
IP 20, RJ45 connectors – 499 NES 251 00 0.190
499 NES 251 00
Components for connection to the CANopen network
Designation Use Length Reference Weight
kg
CANopen preformed cordsets Preformed cordsets with two 5-way M12 A-coded
for Advantys FTB/FTM IP67 angled connectors (one male connector and one
distributed I/O
female connector)
0.3 m FTX CN 3203 0.040
0.6 m FTX CN 3206 0.070
1 m FTX CN 3210 0.100
2 m FTX CN 3220 0.160
3 m FTX CN 3230 0.220
5 m FTX CN 3250 0.430
(1) Requires the use of crimping pliers TWD XMTCT.
(2) Ith = 30 A for mounting with a space of 13 mm between two relays, Ith = 25 A for side-by-side mounting. Operating temperature
range around the product: - 40…85°C.
FTX CN32pp
Description:
page 24
Characteristics:
pages 25 to 27
Functions:
pages 28 and 29
Dimensions:
page 30
Connections:
page 31
32