Twido Programmable controller

Characteristics
Connection interfaces 0
Advantys Telefast ABE 7 pre-wired system
Connection sub-bases for Twido controller
Environment characteristics
Product certifications
UL, CSA
Degree of protection Conforming to IEC 60529 IP 2X
Protective treatment
“TC”
Resistance to incandescent wire Conforming to
IEC 60695-2-11
°C 750: extinction < 30 s
Shock resistance
Conforming to
IEC 60068-2-27
Vibration resistance
Conforming to
IEC 60068-2-6
Resistance to electrostatic discharge Conforming to
IEC 61000-4-2
Resistance to radiated fields Conforming to
IEC 61000-4-3
Immunity to fast transient currents Conforming to
IEC 61000-4-4
Surge withstand
Conforming to
IEC 61000-4-5
Ambient air temperature
Conforming to
IEC 61131-2
Dielectric test voltage
(for 1 minute)
Overvoltage category
Degree of pollution
Mounting
Connection
Terminals/mounting
rails
Conforming to
IEC 60664-1
Conforming to
IEC 60664-1
Conforming to
IEC 60715
Flexible cable
without cable end
Flexible cable
with cable end
ms 11 (half sine wave)
15 gn (acceleration)
Hz 10…150
2 gn (acceleration)
Level 3
V/m 10 (80 MHz to 2 GHz), level 3
Level 3
μs 1.2/50 - 8/20
°C Operation: - 5…+ 60
°C Storage: - 40…+ 80
kV 2
Category II
2
On standard 7 rail, height 15 mm, width 35 mm
mm 2 1 x 0.14…2.5 –
AWG 1 x 26…14 –
mm 2 1 x 0.09…1.5 2 x 0.09…0.75
AWG 1 x 28…16 2 x 28…20
Solid cable mm 2 1 x 0.14…2.5 2 x 0.12…1.5
AWG 1 x 26…12 2 x 28…16
Tightening torque Nm 0.6 (with 3.5 mm at screwdriver)
Supply characteristics (controller side)
Supply voltage
Conforming to
c V 19…30 (Un = 24)
IEC 61131-2
Maximum supply current
c A 2
per sub-base
Voltage drop on supply fuse c V 0.3
Supply overload and
short-circuit protection
by quick-blow fuse (included)
A 2
Characteristics of the control circuit for 1 channel (sensor/controller side)
Sub-base type
Passive connection sub-bases
for discrete signals
Connection sub-bases
with soldered relays
ABE 7 B20MPN2p E16EPN20 E16SPN2p B20MRM20 E16SRM20
Number of channels Passive input 12 16 – 12 –
Passive output 8 – 16 – –
Solid state output – – – 2 –
Relay output – – – 6 16
Rated voltage Ue c V 24
Min/max voltage
Conforming to
c V 20.4/26.4 20.4/28.8 19/30
IEC 61131-2
Internal current per channel at Ue Passive input mA –
–
(3.2 for ABE 7
B20MPN22)
Passive output mA –
– –
–
(3.2 for ABE 7
B20MPN22)
(3.2 for ABE 7
E16SPN22)
Solid state output mA – 4.5 –
Relay output mA – 9
State 1 guaranteed Solid state output V/mA – 16/5.5 –
Relay output V – 16.8
State 0 guaranteed Solid state output V/mA – 10/0.4 –
Relay output V – 2
Conformity
Conforming to
IEC 61131-2
Type 1 Type 1 – Type 1 –
Presentation :
page 96
Compatibility :
page 97
Curves :
pages 100 and 101
References, dimensions :
pages 102 and 103
Schemes :
pages 104 to 107
98