ÿþþ ÿ R O - C A N - I N T E R F A C E ...

6.5. DELIB CLI (command-line interface)
In some programming languages (like PHP), you can't include DLLs, therefore is
an extra console command, which you can directly call out of the program (with
appropriate parameters). You can find this command after installation of the DELIB
driverlibrary in the directory C:\Programme\DEDITEC\DELIB\Programs\Console.
You can find the DELIB CLI Command for Windows after Installation of the DELIB
driverlibrary in the directory C:\Programme\DEDITEC\DELIB\programs\cli\ .
The DELIB CLI Command for Linux is located in the directory "/deditec-cli/, after
unzipping the ZIP-Archiv "delib-linux-cli".
Definition (Windows)
delib_cli command channel [value | unit ["nounit"] ]
Definition for USB-Module (Linux)
sudo delib-cli-usb command channel [value | unit ["nounit"] ]
Definition for RO-ETH-Module (Linux)
delib-cli-eth command channel [value | unit ["nounit"] ]
Note: The parameters are separated by spaces.
These commands and parameters are not case sensitive.
Parameter
command channel value unit nounit
di1 0, 1, 2, ...
di8
di16
di24
0, 8, 16, ...
- hex nounit
do1 0, 1, 2, ... 0/1 (1-bit command)
do8
do16
do24
0, 8, 16, ...
8-bit value
(Bit 0 for channel 1, Bit
16-bit value
1 for channel 2, ...)
24-bit value
- -
ai 0, 1, 2, ... -
integer or hexadecimal number
hex, volt, mA nounit
ao 0, 1, 2, ...
(starting with 0x).
For an integer a V for Volt, mA for
milli Ampere can be attached.
- -
Software |Seite 90