2 weeks ago

V27 Software Guide Pulpmatic Ultima Eco Uno Incomatic V1.7

18.1 Programming the

18.1 Programming the speaker To program the speaker: • The electrical power supply to the machine must be ON • Insert your pre-recorded SD card into the slot • Instructions to program SD card are in the software manual • Leave the SD card in the speaker until you hear a long beep (could be up to 120sec) • Remove the SD card. The audio system is now ready to use • If the speaker emits two short bleeps. The recorded message has failed to load. 18.2 Adjusting speaker volume • Twist the cover of the speaker anticlockwise • Locate and adjust the volume control in the bottom right corner • When volume correctly set, close the speaker cover Copyright © 2017 DDC Dolphin Ltd. Page 46 of 47 February 18 SGPv27 – V1.7

19. Contact details Company Name: DDC Dolphin Ltd Trading Address: The Fulcrum Vantage Way Poole Dorset UK BH12 4NU Office: +44 (0) 1202 731 555 Fax: +44 (0) 1202 731 666 Web: For Technical Support and Parts please email the service team at DDC Dolphin, providing the serial number of the machine and specifying the details of the problem or parts required. e-mail: Emergency technical support is available through the following DDC Dolphin contact. (Please note geographical time difference with UK): Office: +44 (0) 1202 731 555 Copyright © 2017 DDC Dolphin Ltd. Page 47 of 47 February 18 SGPv27 – V1.7

A Leader's Guide to Agile Business - Rally Software
Medical Office Software Guide
WinAlign® Software
License Administration Guide - Sonnet Software
Agile Development, DevOps and achieving ... - Rally Software
Geovision NVR Software Feature Guide - Use-IP
Product datasheet: Sony SNC-DH240T - Network Webcams
Estimation of Source Parameters for Hazard Releases
SNC-DH110T - Sony Professional Solutions Asia Pacific
Ultima SmartBelt User Guide
EtherLogic Ultima Controller - Industrial Control Links
JideFX Common Layer Developer Guide - JIDE Software
Polycom UC Software Administrators' Guide