2018 Ascot Buyer's Guide_compressed

128
LIFTING EQUIPMENT // JACKS
Hydraulic Jacks, Floor Jacks, Axle Jacks
Service Jacks (cont.)
®
LIFTING EQUIPMENT // JACKS
PROFESSIONAL LIFTING EQUIPMENT
22-TON CAPACITY AIR/
HYDRAULIC FLOOR JACKS
• Long “T” handle helps in positioning jack under
vehicles with obstructions of ground effects • Jack
load release top mounted at “T” handle and allows for
easy operation at any handle position • Handle locking
lever secures handle in either vertical, horizontal or
45° position • Compact design fits easily between
tandem wheels • Rust inhibitive coating
on ram and extension screw offers
longer equipment life • Large diameter
wheels for easy maneuverability • Selfretracting
ram eliminates manual
lowering of jack • Fast operating
and extremely durable • Includes
302-72200
3 adapters of differing heights
MFG. CAP. MIN. HGT. / PSI WT.
ASCOT NO. NO. (TONS) MAX. HGT. RANGE (LBS.)
302-72200 72200D 22 9" / 18” 85-200 115
22-TON AXLE JACK
• ONE PIECE HEAVY DUTY “T” HANDLE WITH THREE
LOCKING POSITIONS: 90°, 45°, 0° • Welded cylinder
and reservoir for added strength and durability
• Chrome-plated rams to resist rust and wear • Builtin
bypass device to protect hydraulic system from
over pumping damage • Steel wheel hub
with metal bearings • ADAPTERS: ¾", 2¼"
and 4" for extended reach • Self-returning
spring for ease of operation • Built-in muffler to
promote quiet operation • Built-in in-line air filter
for extended motor life • High speed turbo
motor for efficient, effortless operation
ASCOT
NO.
ONE-PIECE
HEAVY DUTY
T-HANDLE
MFG.
NO.
CAP.
(TONS)
MIN. HGT. /
MAX. HGT.
HANDLE
LENGTH
OVERALL
LENGTH /
WIDTH
302-62220 62220 22 9" / 18" 46" 22-3/4" /
12-5/8"
302-62220
SADDLE
DIAM.
WT.
(LBS.)
2-3/4" 95
HYDRAULIC AIR ACTUATED
SINGLE STAGE TRUCK JACKS
• Three handle angles choices for space
saving storage, easy carrying move and easy
access to lifting point • Large steel wheels for
easy positioning and smooth motion • Sturdy
one-piece handle assembly is standard on
all Omega Truck Jacks • Chrome plated
rams • Heat-treated extension screw
allows low pick-up height adjustment
and maximum lift height • U.S. Patented
built-in by-pass device protects hydraulic
system from over pumping damage
ASCOT
NO.
THREE
HANDLE
ANGLE
CHOICES
CHROME
PLATED
RAMS
MFG.
NO.
CAP.
(TONS)
LARGE
STEEL
WHEELS
MIN. HGT. /
MAX. HGT.
302-23221 23221C 22 9-3/4" /
23-5/8”
302-23221
HANDLE
LENGTH
BASE
SIZE
47-3/8" 22" x
12-5/8”
302-23222 23222C 22 8-1/2"/ 22" 47-3/8" 22" x
12-5/8”
302-23301 23301C 30 11" / 18" 40-7/8" 21-1/2" x
12-1/2”
302-23501 23501 50 12" / 19" 40-7/8" 22-7/8" X
13-3/4"
302-23991 23991 100 12" / 18-1/8" 40-7/8" 26" X
15-3/4"
EXT.
SCREW
WT.
(LBS.)
3-7/8" 100
3-7/8" 95
N/A 100
— 152
— 253
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION