2018 Ascot Buyer's Guide_compressed

316
SERVICE EQUIPMENT // WHEEL BALANCERS
Wheel Balancer Accessories
Wheel Balancer Accessories (cont.)
PRESSURE DRUMS, RINGS
BALANCER CHUCKS
• Balancing some light truck wheels on a cone can
be challenging. The greater the offset, the greater
the challenge. If the wheel is not sitting straight
on the cone, balancers will give false readings
• The 3-jaw chuck eliminates issues with cone
seating providing the MOST ACCURATE balancing
483-10542
SERVICE EQUIPMENT // WHEEL BALANCERS
483-10544
483-13308
ACCURATE
BALANCING
WITH 3-JAW
CHUCK
482-83330
ASCOT NO. MFG. NO. ITEM DESCRIPTION
483-10542 8110542 Small Pressure Drum 4.625" Diameter,
1.125" I.D.
483-10544 8110544 Large Pressure Drum 5.75" Diameter, 1.125" I.D.
483-12012 8112102 No-Mar Ring Same as 308105 except
with 40mm I.D.
483-12106 8112106 Small Pressure Drum 4.625" Diameter,
40mm I.D.
483-13308 8113308C XL Pressure Drum (8.375") O.D. Rubber Lip
to help prevent marring
the Wheel. 28mm I.D.
483-13309 8113309C XL Pressure Drum (8.375") O.D. Rubber Lip
to help prevent marring
the Wheel. 40mm I.D.
483-82954 8112954 Rubber Lip For Small Pressure Drum
(4.625), Fits 110542 &
112106 Pressure Drums
483-83671 8500036701 XR Pressure Cup 40mm ID Shaft, Fits
85000371 Slide Nut
483-83691 8500036901 Rubber Ring For XR 40mm
Pressure Cup, Fits
85000371 Slide Nut
ASCOT NO. MFG. NO. DESCRIPTION RANGE
40MM
482-83330 8113330C Standard Balancer 3.13" - 7.13"
Chuck w/Plate
482-85856 85000856 Extension Jaws for Extended to 9.125"
Standard Chuck
482-81850 8111850 Front Plate,
10"
Optional for
Extended Jaws
482-85908 85009088 Heavy Duty
8" - 12"
Balancer Chuck
w/Plate
482-85909 85009089 Front Plate 12"
2"
482-85906 85009086 Heavy Duty
8" - 12"
Balancer Chuck
w/Plate
482-85907 85009087 Front Plate 12"
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION