2018 Ascot Buyer's Guide_compressed

SUPPLY CORPORATION
WHEEL TORQUE PRODUCTS // WHEEL SERVICE PRODUCTS 91
WHAT IS TORQUE?
Torque is the measurement of twisting force that is applied to a lug nut to create bolt tension.
Torque Sockets, Torque Limiting Socket Set
WHAT IS CLAMPING FORCE?
QUALITY AND INNOVATION SINCE 1908
Clamping force is the result of bolt tension and it is the physical property that holds the wheels on the vehicle.
DOES THE CORRECT TORQUE GUARANTEE THE CORRECT CLAMPING FORCE?
No. Clamping force cannot be measured in the field, so technicians must use the correct torque to
approximate the amount of clamping force.
TORQUE MULTIPLIERS
Since • Increase there are the range a number of your of torque factors wrench that as much determine as how much clamping force is generated per foot pound of torque,
14 to one with a Central Torque Multiplier • Designed with
168-97354
technicians four pinion should gears in a always compact follow housing, these the multipliers RIST procedure developed by the Tire Industry Association (TIA).
MICROMETER
expand your torque wrench range by their stated ratio
TORQUE
WRENCH
FOUR
PINION
GEARS
ASCOT NO. MFG. NO. RATE
DUAL
SCALE
DRIVE
INPUT
R
EXPANDS
TORQUE
WRENCH
RANGE
DRIVE
OUTPUT
SPEEDY
TORQUING
MAX. OUTPUT
CAP
WEIGHT
(LBS.)
BODY
LENGTH
TOTAL
LENGTH
495-06380 6380 4:1 1/2" 3/4" 1,000 In.-lbs. 7 6.6" 22"
495-06382 6382 4.33:1 1" 1-1/2" I4,000 In.-lbs. 35 9.7" 30"
495-06383 6383 4.6:1 1" 1-1/2" 8,000 In.-lbs. 47 12.1" 32"
stands for
495-06384 6384 6:1 1" 2-1/2" 12,000 In.-lbs. 78 11.5" 30"
495-06386 6386 14.3:1 3/4" 1-1/2" 3,000 In.-lbs. 30 9.7" 30"
495-06387 6387 4:1 3/4" 1" 2,000 In.-lbs. 14 6.6" 25"
components
MICROMETER TORQUE
S
WRENCHES
• Set desired torque on micrometer type
scale by rotating hand grip • Automatically
indicates desired torque by feel and sound • No
need to worry about getting a reading • Wrench
torques left or right and resets in seconds • Accurate
throughout entire torque range • DUAL SCALE: English and
international Metric • Chrome finish • ACCURACY: +/-4%CW
and +/-6%CCW • 20% - 80% of capacity • Metal hand grip is
resistant to damage from striking or automotive Tfluids such as
gasoline, oil and kerosene • RATCHET HEAD: The 45-tooth ratchet
is designed for speedy torquing and operating in restricted areas
stands 495-06380 for
remove debris from
mating surfaces
inspect all of the
stands for
snug the lug nuts
in a star pattern
stands for
torque the fasteners
495-96351
to specification
WEIGHT
(LBS.)
Call for
availability
on complete
TIA torque
procedures
495-96352 96352 10-100 In.-lbs. (5 In.-lbs.) 3/8" Ratchet 17.3 inches 1.9
industry 495-96353 could provide 96353 in-house 25-250 technician In.-lbs. (1 training In.-lbs.) that 1/2" exceeds Ratchetthe minimum 20.0 inches requirements 2 established by 29 CFR 1910.177.
495-96355 96355 100-600 In.-lbs. (5 In.-lbs.) 3/4" Ratchet 38.5 inches 0.5
495-96361 96361 20-200 In.-lbs. ( 1 In.-lbs.) 1/4" Ratchet 12.4 inches 1.5
• Range is 25 to
250 ft./lbs. • HEAVY
DUTY RATCHET: Fewer
and stronger teeth
• UNIDIRECTIONAL
TORQUEING:
Tightens in right hand
direction only, does
not tighten in left
hand direction for
improved performance
• ERGONOMICALLY
DESIGNED HANDLE
MADE FROM
MODIFIED SILICONE:
Tear resistant, oil
and solvent resistant
• Protective head
cover made from
modified silicone
• Comes in plastic
storage case
• MADE IN USA
ASCOT SUPPLY CORPORATION
MADE IN THE
USA
HEAVY
DUTY
FEWER &
STRONGER
TEETH
ASCOT NO. MFG. NO. DESCRIPTION
168-97354 97354 Micrometer
Torque Wrench:
25-250 Ft./Lbs.
TORQUE SPECIFICATIONS
Hub-Pilot Wheel: 450-500 ft/lbs. oiled | Stud-Pilot Wheel: 450-500 ft/lbs. dry | Demountable Rim: 200-260 ft/lbs. dry
TIA is the ASCOT industry NO. MFG. leader NO. in commercial RANGE (INCREMENT) truck tire and wheel DRIVE service LENGTH education. Since Occupational Safety and Health Administration (OSHA)
Regulation 495-96351 29 CFR 1910.177 96351 requires 25-250 In.-lbs. training (1 in.-lbs.) for all employees 3/8" Ratchet that service 12.6 inches truck tires, 1.4 fleets must make sure that every technician who installs,
removes or handles truck tires in any way has compliant training. TIA developed the Fleet Tire Service OSHA Compliance Program so the trucking
For more 495-96395 information 96395 10-80 on In.-lbs. TIA (In.-lbs. training ) 3/8" Flexhead or the 17.6 RIST inches procedure,
2.2
visit TIA’s website: http://www.tireindustry.org/training.asp
or call 800-876-8376, ext. 106. ®
BUYER'S GUIDE
WHEEL SERVICE PRODUCTS // WHEEL TORQUE PRODUCTS