2018 Ascot Buyer's Guide_compressed

312
SERVICE EQUIPMENT // WHEEL BALANCERS
Wheel Balancer Accessories
Wheel Balancer Accessories (cont.)
PROGRIP PRESSURE CUP
• Pressure Cup for all ProGrip
Quicknuts 40mm, 38mm, 36mm, 28mm
• HW143 403 003, HW143 403 006,
HW143 383 003, HW143 383 006,
HW143 363 003, HW143 363 006,
HW143 283 003, HW143 283 006,
HW143 404 003, HW143 404 006,
HW143 285 006, HW143 405 006,
HW140 403 033, HW140 404 033
FOR ALL
PROGRIP
QUICKNUTS
PRESSURE RING FOR ALL
PROGRIP QUICKNUTS
• Pressure Ring must be present on ProGrip
QuickNuts when using Quick or Flange Plates
• Without the pressure ring, the clamping device
does not provide enough torque pressure to press
rim on cones/collets evenly and consistently
eliciting inaccurate balancing results
SERVICE EQUIPMENT // WHEEL BALANCERS
483-08002
ASCOT NO. MFG. NO. DESCRIPTION
483-08002 HW190 008 002 ProGrip Pressure Cup
RUBBER COVER FOR
5" PRESSURE CUP
• Provides rubberized protection
between wheel rim and pressure cup
RUBBERIZED
PROTECTION
ASCOT NO. MFG. NO. DESCRIPTION
483-08027 HW190 008 027 Pressure Ring for all
ProGrip QuickNuts
BACKING SPRING
483-08027
• Must be present on all balancers
with open mid centering devices/
hubs (Coats) • Without backing spring,
wheels can only be front coned – not
acceptable for proper balancing
483-08005
483-40015
ASCOT NO. MFG. NO. DESCRIPTION
483-08005 HW190 008 005 Rubber Cover for 5” Pressure Cup
ASCOT NO. MFG. NO. DESCRIPTION
483-40015 HW190 400 015 Backing Spring
BUYER'S GUIDE
ASCOT SUPPLY CORPORATION
SUPPLY CORPORATION