2018 Ascot Buyer's Guide_compressed

BRAKE LATHES // SERVICE EQUIPMENT 323
Brake Lathe Accessories
SAFETY SHIELD
• Clear plastic shield provides
added eye protection • Deflects
metal chips downward, while
permitting an unobstructed view
of the work • Attaches to the No.
6900 twin-cutter with the thumb
screw provided • Can be quickly
moved out of the way for rotor
mounting and demounting
416-09481
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-09481 9481 Safety Shield 2 lbs.
416-11154 11154 Replacement Shield —
ENCORE/ALLIANCE
REAR DRUM ADAPTER
• Fits inside the bearing to mount
the drum on an 11/16" arbor • Also
requires a No. 3127 step-down adapter
and a No. 3904 centering cone 416-02170
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-02170 2170 Encore/Alliance Rear Drum Adapter 4.5 oz.
STEP-DOWN ADAPTER
• Permits the use of 1" adapters on the
11/16" arbor • 1" x 11/16" • Not standard
with the No. 9708 11/16" arbor set
416-03127
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-03127 3127 Step-Down Adapter 4.5 oz.
TOOL HOLDER
REPLACEMENT KIT FOR
6950 TWIN CUTTER
• Increases tool bit reach of early
design No. 6900 twin-cutters to
allow machining of thin solid rotors
• Replaces worn parts in all 6900’s
• INCLUDES: One No. 10650 LH tool
bit holder; one No. 10651 RH tool
bit holder; one No. 10701 RH and
one No. 10702 LH tool bit assembly;
two return Springs; one spring tool
416-08899
416-10650 416-10651
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-08899 8899 Tool Holder Replacement Kit 1 lb., 2.5 Oz.
416-10650 10650 LH Tool Bit Holder 8 Oz.
416-10651 10651 RH Tool Bit Holder 8 Oz.
11/16" ARBOR SET
• Used to mount drums and rotors
with splined hubs, or with center
holes less than 1" in diameter • Used
on 2002, 3000, 4000, 4100, 7000,
7700 Lathes • INCLUDES: centering
cone, 3 spacers and 11/16"
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-09708 9708 11/16" Arbor Set 8 lbs.
11/16" ARBOR NUT
• Needed with older No. 9708
11/16" arbor sets to provide a
1-1/4" hex nut to drive the Model
8750 swirl finisher • (LH thread
for Models 2002, 3000, 4000)
416-09708
416-25882
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-25882 25882 11/16" Arbor Nut 8 oz.
SERVICE EQUIPMENT // BRAKE LATHES
1” ARBOR
& NUT
• For drums and
rotors up to 100 lbs.
• Standard with
lathe Models 2002,
3000, 4000, 4100,
7000 and 7700
416-03101
ASCOT NO. MFG. NO. DESCRIPTION SHIPPING WT.
416-03101 3101 1" Arbor 6 lbs.
416-03102 3102 1" Arbor Nut 8 oz.
416-03102
DOUBLE CHUCK
ADAPTER SET
• Range 2.125" - 5.750"
• Hubless Rotors & Drums
through 1 ton vehicles
• Double chuck • 4 Backings
ASCOT NO. MFG. NO. DESCRIPTION
416-41412 41412 Double Chuck Adapter Kit
416-41412
SUPPLY CORPORATION
ASCOT SUPPLY CORPORATION
BUYER'S GUIDE